Productos
Adhesivos Termoplásticos / Adhesivo Feno Term 807
Adhesivo Feno Term 807
Adhesivo Termoplástico Feno Term 807
| Características | Componentes |
|---|---|
| -- | -- |
• Very fast setting thermoplastic adhesive in rod ? 4 mm, used on automatic machines for shoe lasting. Bonding on leather, reclaimed materials, etc.
• CHEMICAL NATURE: Copolyester
PHYSICAL SPECIFICATIONS:
• Softening point R&B (ASTM E 28) 170 - 185 °C
• Viscosity (232 °C – 2,16 Kg) (ASTM D 1238) 24 - 27 Pa.s
• Specific gravity 1,275 g/cm3
• Colour dull white
MECHANICAL SPECIFICATIONS:
• Maximum load (ASTM D638) 20 - 25 MPa
• Ultimate elongation (ASTM D638) 200 - 400 %
• Modulus of elasticity (ASTM D790) 250 - 350 MPa
OTHER TYPICAL SPECIFICATIONS:
• Setting time very fast
• Work temperature 230 – 240 °C
• PACKAGE: The product is packed in cartons holding 12 reels for a total net weight of 25Kg
• CHEMICAL NATURE: Copolyester
PHYSICAL SPECIFICATIONS:
• Softening point R&B (ASTM E 28) 170 - 185 °C
• Viscosity (232 °C – 2,16 Kg) (ASTM D 1238) 24 - 27 Pa.s
• Specific gravity 1,275 g/cm3
• Colour dull white
MECHANICAL SPECIFICATIONS:
• Maximum load (ASTM D638) 20 - 25 MPa
• Ultimate elongation (ASTM D638) 200 - 400 %
• Modulus of elasticity (ASTM D790) 250 - 350 MPa
OTHER TYPICAL SPECIFICATIONS:
• Setting time very fast
• Work temperature 230 – 240 °C
• PACKAGE: The product is packed in cartons holding 12 reels for a total net weight of 25Kg